Overview of the inFlow Device

The inFlow device is a monthly intraurethral insert

The inFlow device with its disposable Introducer, and the device when deployed
Device with disposable IntroducerDevice when deployed

The inFlow device consists of a miniature valve-pump mechanism in a silicone housing. There are six sizes so it can fit individual patient anatomy. Device sizing and initial insertion is performed by a physician. Thereafter, devices are replaced every 29 days either in the physician's office or in your home.

The Activator remote control

Hand holding the Activator remote control

Operation of the inFlow device is controlled by its hand-held remote control

This is how the inFlow device works:

  1. Step 1: You hold the Activator remote over your pelvis and press its button

    Woman seated on a toilet holding the Activator over her pelvis
  2. Step 2: The remote activates the device pump using non-contact energy transfer technology

    Illustration of the Activator powering the device pump
  3. Step 3: The pump empties the bladder at a normal flow rate

    Illustration of the device pump emptying the bladder
  4. Step 4: When you release the button, the remote automatically closes the device valve, blocking urine

    Illustration of the device valve closing

The problem with catheterization is that it is a fundamentally unnatural process. Catheters are simple tubes that rely on gravity to passively drain urine, whereas natural urination is an active process. That's why the inFlow device pumps urine out, creating a turbulent flow that helps flush bacteria each time you void.